LAUNCH CRE200 OBD2 Scanner Auto ABS SRS Diagnostic Tool

LAUNCH Creader Elite CRE200,ABS SRS OBD2 Scanner Code Reader Car Diagnostic Tool Touch Screen Screenshot 4 in 1 Live Date Graph Auto VIN WiFi Free Update Share Report via Email.

Why Launch Creader Elite CRE200 is the best choice for Car Owners ?

It has the following functions and advantages:

√ Smart (Auto-Detect) Diagnosis:

Once the tool and the vehicle are properly connected,the system starts auto-detect process.Once the whole process is successfully finished,a diagnostic report will be automatically generated.

√ Manual Diagnosis:

If Auto-Detect failure occurs,manual diagnosis is also available.Diagnosis functions include:Version Information,Read DTCs, Clear DTCs and Read Data Stream (supports 3 display modes: Value,Graph and Merged).

√ OBD II Diagnosis:

10 modes of OBD II test are supported,including EVAP,O2 Sensor,I/M Readiness,MIL Status,VIN Info, and On-board monitors testing,etc.

√ ABS&SRS Diagnostic:

The ABS/SRS diagnostic function is used to retrieve and clear codes from the vehicle's ABS/SRS system.

√ One-Click Update:

Let you update your diagnostic software and APK online.

√ Mall:

This function allows you to purchase more diagnostic software with full system and full functions that are not pre-installed on this tool.(Coming Soon)

√ Diagnostic History:

This function provides a quick access to the tested vehicles and users can choose to view the test report or resume from the last operation,without starting from scratch.

√ Diagnostic Feedback:

Use this option to submit the vehicle issue to us for analysis and troubleshooting.

√ DTC Library:

Allows you to retrieve the definition of the diagnostic trouble code from the abundant DTC database.

√ Turn off the Engine Light:

CRE200 is a new scanner developed by LAUNCH.You can check all engine-related fault codes,find out the cause of the check engine light to turn on,turn off the fault indicator (MIL),and locate the broken O2 sensor.

Displays battery real-time voltage once properly connected to the vehicle.

ABS System Diagnose

ABS (anti-lock braking system) enables the wheels of a vehicle to maintain tractive contact with the ground, helping drivers retain steering control by prevents unexpected skidding of the car on slippery roads, thus reducing the risk of crashing.

SRS Airbag System Diagnose

A supplemental restraint system, an extra safety measure that is commonplace in vehicles, is designed to improve occupant protection in some ways of crushes. Check the SRS (Airbag) system to ensure passenger safety in certain types of collisions.

Launch Creader Elite CRE200 supports Multi-Language:

The scan tool supports multiple languages. You can change the system language to English, French, Spanish, German, Italian, Russian, Portuguese, Japanese, Korean, and Traditional Chinese.

Full OBD2 Functions are Ready for Engine System Diagnostic

$01 - Request Current Powertrain Diagnostic Data

$02 - Request Powertrain Freeze Frame Data

$03 - Request Emission-Related Diagnostic Trouble Codes

$04 - Clear/Reset Emission-Related Diagnostic Information

$05 - Request Oxygen Sensor Monitoring Test Results

$06 - Request On-Board Monitoring Test Results for Specific Monitored Systems

$07 - Request Emission-Related Diagnostic Trouble Codes Detected During Current or Last Completed Driving Cycle

$08 - Request Control of On-Board System Test or Component

$09 - Request Vehicle Information

$10 - Request Emission-Related Diagnostic Trouble Codes with Permanent Status.

16 Reset Function

Note :

CRE200: NO Free Reset Function

CRE202: Choose 2 Free Reset Function

CRE205: Choose 5 Resets Function

One Reset Software : US $19.95/yea

1. Oil Lamp Reset Service

Allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.

2. EPB Electronic Park Brake Reset

It is important in the maintenance of electronic braking system's safety and efficiency.

3. BAT battery service

Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.

5. SAS Steering Angel Sensor Reset

Helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.

6.TPMS Tire Pressure Monitoring System Reset

Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.

7. Anti-Theft Matching (IMMOBILIZER)

Add a new programmed key. PIN code is required.

8. ABS Bleeding

ABS brake bleeding to get a firm brake pad after air exhaustion after repair ABS pump system.

9. Sunroof Reset

The sunroof needs to be reset when the sunroof control unit have communication problem or changed.

10. Suspension Reset

Try reset electronic suspension air ride with the massage system close all doors koeo flip through messages system go to suspension reset or on off.

11. Gearbox (Transmission )Reset

Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive. Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern. After you follow this programming method of the TCU / ECU drive the car.

12. AFS Headlamp Reset

'AFS' means Adaptive Front lighting System (at night with the Bi-Xenon headlights) it swivels either side, pressing that button means they stay pointing straight ahead and don't turn when you turn the steering wheel.

13. Injector Coding

Leaking injectors and some dead injectors can be missed even when an injector is disabled. Other problems with the ignition system and mechanical components also may not show an rpm loss when an injector is turned off.

14. Throttle Adaptation

The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine. In an electronically fuel injected car, a throttle position sensor and air flow sensor communicate with the computer, which supplies the corresponding amount of fuel needed at the injectors. It must need re-learning throttle sensor position after clearing or repair.

15. Gear Learning

The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.

16. Air Level calibration

Battery Voltage Test

The battery voltage is displayed in real time, and the battery voltage can be monitored in time

Auto / Manual Vin Car Scanner

LAUNCH CRE200 professional OBD2 code reader can automatically acquire vehicle VIN number to perform OBD2 diagnosis accurately and efficiently. If the tool can not obtain the VIN information, you can also perform vehicle

diagnosis manually. In this mode, you need to execute the menu-driven command and then follow the on-screen instruction to proceed.

4-in-1 Live Data

This function retrieves and displays live data and parameters from the vehicle's ECU. A pull-down list of the data stream items will appears on the screen. Select the necessary items (Max. 4 items can be selected at the same time) and the screen will display the waveforms corresponding to these items immediately.

Diagnostic History

Generally once a vehicle diagnosis is performed, the tool will record the every details of diagnostic session. The History function provides direct access to the previously tested vehicles and users can resume from the last operation, without the necessity of starting from scratch.

Tap “History” on the Diagnose main menu screen, all diagnostic records will be listed on the screen in date sequence.

Plug and Play

Plug the diagnostic cable into the vehicle's DLC port, the screen of CRE200 will will automatically light up and turn on. It is very convenient.

DTC Library

This option enables you to retrieve the detailed description of certain DTC from the local DTC database. Swipe the screen upwards / downwards to alter the value, then press "OK" button, the screen will display definition of the DTC.

Data Record and Playback

If a user records the running parameters or waveform graphs while reading data stream, it will be saved as diagnostic records and appear under this tab.

Technical Specifications :

Screen : 4 inch Touch Screen with a resolution of 480*480

CPU : 4-core 1.3 GHz Processor

Memory : 1GB RAM + 16GB ROM

Wifi : 802.11b/g/n 2.4GHz

USB : Type C

OBDII input voltage range : 9-18V

Working Temperature : -10 to 50 °C ( 14 to 122 °F )

Storage Temperature : -20 to 70 °C ( -4 to 158 °F )

LAUNCH CRE200 Supports Car Brands

for AUDI, for BMW, for ROLLS ROYCE, for MINI, for CHRYSLER, for DODGE, for JEEP, for CITROEN, for DAEWOO, for FIAT, for ABARTH, for ALFA ROMEO, for LANCIA, for FORD, for LINCOLN, for FORD (EUROPE), for GM, for CHEVROLET, for CADILLAC, for BUICK, for HONDA, for ACURA, for HYUNDAI, for ISUZU, for ISUZU (THAILAND, for KIA, for LAND ROVER/JAGUAR, for MAZDA, for MERCEDES-BENZ, for MAYBACH, for MITSUBISHI, for NISSAN, for INFINITI, for GTR (NISSAN), for GTR, for OPEL, for VAUXHALL, for OPEL (SOUTH AFRICA), for PEUGEOT, for PORCHE, for RENAULT, for DACIA, for SAMSUNG RENAULT, for SAAB, for SEAT, for SKODA, for SMART, for SPRINTER, for SUBARU, for SUZUKI, for TOYOTA/LEXUS, for VOLVO, for VW, for BENTLEY, for BUGATTI, for LAMBORGHINI, for Holden

Packing list

1pc * LAUNCH X431 Creader Elite CRE202 Main unit

1pc * USB Cable

2pc * Manual book