Best Sellers

T40178 Adjustable Engine Oil Level Gauge Dipstick Tool

Brand: OBDResource
$8.26
Tax included

This oil gauge and dipstick is designed for measuring the oil levels on different Audi engines fitted with electronic oil level systems.Specifically for Audi engines fitted with electronic oil level systems.

Quantity
  Security Payment

Guard your secure payment with SSL.

  Delivery Policy

Handling time with 24 hours.

  Return Policy

30 days free return, 3 months exchange, 3 years warranty.

T40178 Adjustable Engine Oil Level Gauge Dipstick Tool for VW Audi A6 A5 A4 2.0L TFSI 3.2L 4.2L FSI

>This oil gauge and dipstick is designed for measuring the oil levels on different Audi engines fitted with electronic oil level systems.

>The tool checks the oil levels on Audi 2.0 TFSI,3.2 FSI,3.0 Supercharged,4.3 FSI and 2.0 TDI CR.

>Oil gauge and dipstick.

>Specifically for Audi engines fitted with electronic oil level systems.

>The tool checks the oil levels on Audi 2.0 TFSI,3.2 FSI,3.0 Supercharged,4.3 FSI and 2.0 TDI CR.

>OEM T40178.

>Can also be used to assist the calibration of the driver’s instrument panel.

T40178 Engine oil level display tester T40178 Engine oil level display tester

①Lower Scale;

②Flexed Screw;

③Upper Scale;

④Chain;

⑤Hand Ring.

Note:

1. The oil level must not be higher than the maximum mark,otherwise the Catalytic converter for exhaust gas may be damaged.

2. For car safety,please do not increase or decrease the oil filling amount at will:

The T40178 oil detection dipstick is suitable for Audi,VW,Skoda and Porsche only.Nothing is omnipotent,you see the engine oil capacity of different manufacturers is different,the depth of the oil detection hole is also different.It is impossible to measure without the standard data provided by the car manufacturer, adding more or less oil has a direct impact on engine operation.

How to use the T40178:

Take Audi A4 engine oil test as an example.

●Step1: The test condition is that the engine oil temperature should not be lower than 60℃;the vehicle is in a horizontal position,wait a few minutes after turning off the engine,the oil flows back into the oil pan,now we can use the T40178 (Engine Oil Level Dipstick Gauge Tool) to measure.

●Step2: Open the knurled bolt of T40178 and move the adjusting ring,Adjust the bottom edge to 39.

●Step3: Insert T40178 into the stop position of the oil dipstick tube (lower edge of adjusting ring).

●Step4: Then pull it out again and read the oil level.

Attention: For 2.0T engine,need to polish the ruler head before inserting.

Packing List:

1pc * T40178 Adjustable Engine Oil Level Gauge Dipstick Tool

N101
500 Items

16 other products in the same category

chat Comments (0)
No customer reviews for the moment.