FR2000C+ 0.01Ω-1200Ω Clamp Ground Resistance Tester Loop Resistance Tester

FR2000C+ 0.01Ω-1200Ω Clamp Ground Resistance Tester Loop Resistance Tester 0.00mA-20A Leakage Current Test 300 Sets of Data Storage

Description:

It uses a new generation of LCD black screen backlight display and microprocessor technology, Ω+A synchronous display, through induction The method of measuring grounding resistance is convenient and quick. When measuring a grounding system with loops, there is no need to disconnect the ground lead wire, no auxiliary electrode, and it is safe and fast. It is widely used in telecommunications, electric power, meteorology, computer rooms, oil fields, power distribution lines, tower transmission lines, gas stations, factory grounding grids, evade thunder rods, etc. The instrument has the characteristics of accurate, fast, simple, stable and reliable testing.

The FR2000+ series clamp-on ground resistance tester is controlled by a microprocessor, which can accurately detect ground resistance and leakage current. It uses fast filtering technology to minimize interference. Store 300 sets of data at the same time.

★ Resistance range: 0-1200Ω

★ Current range: 0-20A

★ New black screen design, high-end luxury

★ Ω + A same screen display

★ Quick self-check function, no need to wait

★ Using fast filtering technology, strong anti-interference ability

★ New design, long life of clamp head

★ 300 groups of storage

Specification:

Model: FR2000C+

Resistance range: 0.01Ω-1200Ω

Type: Multifunctional

Resistance resolution: 0.001Ω

Current range: 0.00mA-20A

Current resolution: 0.01mA

Function: ground resistance test, loop resistance test, leakage current test

Accuracy: Ground resistance accuracy: ±1%±0.01Ω, current accuracy: ±2%±1mA

Ambient temperature and humidity: 23°C±5°C, below 75%rh

Power supply: DC6V (4 AA alkaline dry batteries)

Measurement method: mutual inductance method

Jaw size: 55mm x 32mm

Ω + A simultaneous display: Ω + A simultaneous display

Display mode: 4-digit LCD display, black screen design

LCD size: 46mm x 29mm

Instrument size: length, width and height: 285mm x 85mm x 58mm

Measuring time: 2 times/sec

Data storage: 300 groups, "MEM" storage indication, display "FUL" symbol to indicate storage is full

Data access: "MR" symbol indicates when accessing data

Overflow display: “OL” symbol indicates when over-range overflow

Interference test: automatic identification of interference signals, "NOISE" symbol indicates when the interference current is large

Alarm function: when the measured value exceeds the alarm set value, an alarm will be issued

Battery voltage: real-time display of battery power, reminding to charge in time when the battery voltage is low

Automatic shutdown: "APO" indication, automatic shutdown after 5 minutes of startup Power consumption: 50mA Max

Quality: Meter: 1180g (including battery)

Working temperature and humidity: -10°C~40C; below 80%rh

Storage temperature and humidity: -20°C~60C; below 70%rh

Insulation resistance: above 20MΩ (500V between circuit and case)

Withstand voltage: AC 3700V/rms (between circuit and case)

External magnetic field: <40A/m

External electric field: <1V/m

Suitable for safety regulations: IEC61010-1 (CAT ll 300V, CAT IV 150V, pollution degree 2); IEC61010-031; IEC61557-1 (ground resistance).

Package includes:

1 x Meter

1 x Calibration ring

1 x Instrument package

1 x User Manual