Smart Wireless WiFi Ring Doorbell Intercom Video Camera Door Bell Chime Security

Features:

--The video door intercom bell is support two way audio, When somebody push the doorbell or PIR detected alarm, your mobile app will receive an alarm video call directly, you can just answer the alarm call to see the video call directly from you mobile app and talk in real time.

--It is HD Resolution with 720p adopted cmos chipset. You may enjoy the excellent image full hd video and picture from this door bell for home surveillance security.Wireless doorphone doorbell camera is for apartment or back yard.

--It is not only a wireless intercoms doorbell for you, and it is also a security ip camera for your home. Multi functions that includes wireless, two way audio,motion sensor support both andriod and ios system of mobile.

--With rainproof design, the doorbell can be installed outdoors, and you are no need to worry about it is drenched by rain.

--Support APP Function, it can be applied for Android, iphone, ipad APP Software.

--Support night vision and built-in IR-CUT technology, available day and night.

Product Specification:

Material: ABS

Size: 144x74.5x32.3mm

Resolution: 1280*720

Field of Angle View: 140°

IR LED: 6*850mm

Wi-Fi: IEEE 802 11 b/g/n

Audio: Two-way Talk With Noise Cancellation

Recording: Device SD Card Recording(20 Seconds)

Storage: 8G/16G/32G(Not Included)

Power Source: 3 x 18650 Specification Batteries(Not Included)

Monitoring: Device Button, Motion Detection, Remote Live View

Notification Function: Push Notifications within 2 second

Device Wakeup: Within 600 ms

Power Consumption: Power Consumption Standby 200μA, Working 170mA

Before You Start (Please fully charge before using the doorbell)

1. Download and install Aiwit App. Scan the QR code or search for Aiwit on the Apple App Store or Google Play. Download and install the app.

2. Create an Aiwit account. Set up your device in the Aiwit app.

To pair your device, follow the steps below and in-app instructions.

1. Open Aiwit App and log in to your account.

2. To add your camera, select the + icon.

3. Select Video Doorbell.

4. Press and hold the Doorbell Button until the red light is flflashing, tap Next, then tap Yes.

5. Enter your 2.4GHz Wi-Fi network and the Wi-Fi password, then tap Next (5GHz is not supported).

6. Use your device camera to scan the QR Code shown on the app, then select Confirm once the Wi-Fi setup has finished.