Best Sellers

AUTO Black 7/8'' motos Motorcycle handlebar Electric Hot Heated Grips

Brand: OBDResource
$16.88
Tax included

The heating wire is wound horizontally, with good comfort, and the power is only half of similar products. It is a real high-efficiency and energy-saving electric heating handle

Quantity
  Security Payment

Guard your secure payment with SSL.

  Delivery Policy

Handling time with 24 hours.

  Return Policy

30 days free return, 3 months exchange, 3 years warranty.

【Product color】: black

【Handle length】: Left handle: 143*36MM; Right handle: 127*36mm

【Handle diameter】: 22mm

【Input voltage】: 12V

【Product power】: 12W-24W adjustable

【Handle temperature】: 50°C-70°C (the above data are obtained from experiments, the laboratory room temperature is 15-20°C, the specific value may fluctuate slightly due to changes in voltage, environment and other objective factors, for reference only)

【Handle type】: can be sealed and open the mouth of the electric heating handle

【Switch Type】: Multi-gear adjustable switch

【Applicable models】: 12V motorcycle with a handlebar diameter of 22MM

【Precautions】:

【1】When installing the left-hand handle, do not twist the handle too much. Excessive twisting will cause the heating wire to shift.

【2】For models with a balance iron, please adjust the installation position of the balance iron, do not squeeze the handle when tightening the screws, and the balance iron and the handle are slightly separated. If the installation position of the balance iron cannot be adjusted, please add a gasket between the balance iron and the handle to separate it. Excessive squeezing of the handle will cause the handle switch to be difficult to toggle, and the heating wire will be squeezed out of the handle surface and other abnormal damages.

【3】Must be 22MM handle inner diameter

【Installation Notes】:

【1】Remove the original handlebar

【2】Wet the inner hole with soapy water with the left hand, and the twisting range should not be too large during installation

【3】When installing the balance iron on the left hand handle, adjust the position of the balance iron to be slightly separated from the handle, and do not squeeze the handle when tightening the screw

【4】 During use, the left hand handle slides on the steel pipe, remove the balance iron, and fix it with a few drops of 502 glue from the end of the handle

【5】Power cord, the red wire is connected to the positive pole, the black wire is connected to the negative pole, (can not be reversed)

【6】When the left-hand handle is installed, the power cord should leave enough wire for turning

【Product advantages】:

【1】The handle is made of high temperature resistant nitrile rubber in one step

【2】 The heating wire is wound horizontally, with good comfort, and the power is only half of similar products. It is a real high-efficiency and energy-saving electric heating handle

【3】Special switch for ultra-thin electric handle

【4】 The right-hand throttle lead wire adopts a silicone fiber sleeve, which has no effect on the flexibility of the throttle.

【5】 The advanced electronic temperature regulation system does not consume power and can better protect the battery. , The handlebar switch with fine workmanship is even more beautiful than the original driver handlebar

【6】 Removable cover, which can be sealed and can be freely switched for use

【7】This structure is much more difficult than straight out. The wire faces the back, and the force is not even at one point when rotating. The wire is sheathed with silicone (the old wire does not have a silicone protective cover), which can be used in very low environments. Silicone has excellent aging resistance and will not harden with time

MP0004
500 Items

16 other products in the same category

chat Comments (0)
No customer reviews for the moment.